Each product will have a different design, different designs are suitable for different purposes, the reliability design of LED point light source lighting includes: electrical safety, fire safety, environmental safety, mechanical safety, health and safety, safe use time, etc. factor. From the perspective of electrical safety, it should comply with relevant international and Chinese standards.
Step / method
1. The brightness of the highlighted LED is different and the price is different. LEDs for LED luminaires shall comply with the laser class I standard.
2, anti-static ability Anti-static ability of the LED, long life, and therefore high price. LEDs with an antistatic greater than 700V are usually used for LED lighting.
3. LEDs with the same wavelength and wavelength have the same color. If the color is consistent, the price is high. It is difficult for manufacturers without LED spectrophotometers to produce pure color products.
4. Leakage current LED is a unidirectional conductive illuminator. If there is reverse current, it is called leakage, and LED with large leakage current has short life and low price.
5. LEDs with different illumination angles have different illumination angles. Special lighting angle, the price is higher. Such as the full diffusing angle, the price is higher.
6. The key to different quality of life is life, and life is determined by light decay. Low light decay, long life, long life and high price.
7. The illuminator of the wafer LED is a wafer, and the price of the wafer varies greatly. The chips in Japan and the United States are relatively expensive, and the prices of wafers in Taiwan and China are generally lower than those in Japan and the United States.
8. Wafer Size The size of the wafer is indicated by the side length. The quality of the large wafer LED is better than that of the small wafer. The price is proportional to the size of the wafer.
9, colloidal ordinary LED colloid is generally epoxy resin, LED with anti-ultraviolet and fire retardant is more expensive, high-quality outdoor LED lighting should be resistant to UV and fire.
LED point light source is colorful and colorful, and it is an indispensable part of outdoor lighting project.
The product is divided into two functions: monochrome LED internal control and RGB colorful external control to meet different customer's effect requirements. The voltage is DC12V or 24V safe voltage.
Monochrome LED internal control point light source: white light, warm light, yellow light, blue light, green light, red light optional;
RGB colorful external control led point light source : can display monochrome, colorful, gradient, jump, running water, marquee, can form the display effect, can display image text, etc.
Lamp protection level: IP65
Applicable places: large buildings, outlines of bridges, outline decoration of outdoor lighting projects;